| Article number |
3RA6120-2AP33
|
3RA6120-2AP32
|
|
|
|
|
SIRIUS Compact load feeder DOL starter 690 V 110...240 V AC/DC 50...60 Hz 0.1...0.4 A IP20 Connection main circuit: plug-in, without terminals Connection auxiliary circuit: Spring-type terminal |
SIRIUS Compact load feeder DOL starter 690 V 110...240 V AC/DC 50...60 Hz 0.1...0.4 A IP20 Connection main circuit: Spring-type terminal Connection auxiliary circuit: Spring-type terminal |
| product brand name |
SIRIUS |
| product designation |
compact starter |
| design of the product |
direct starter |
| product type designation |
3RA61 |
| General technical data |
| product function control circuit interface to parallel wiring |
Yes |
| product extension auxiliary switch |
Yes |
| power loss [W] for rated value of the current |
|
| ● at AC in hot operating state |
0.01 W |
| ● at AC in hot operating state per pole |
0.01 W |
| ● without load current share typical |
6 W |
| insulation voltage rated value |
690 V |
| degree of pollution |
3 |
| surge voltage resistance rated value |
6 000 V |
| maximum permissible voltage for protective separation |
|
| ● between main and auxiliary circuit |
400 V |
| ● between auxiliary and auxiliary circuit |
250 V |
| ● between control and auxiliary circuit |
300 V |
| degree of protection NEMA rating |
other |
| shock resistance |
a=60 m/s2 (6g) with 10 ms per 3 shocks in all axes |
| mechanical service life (operating cycles) |
|
| ● of the main contacts typical |
10 000 000 |
| ● of auxiliary contacts typical |
10 000 000 |
| ● of the signaling contacts typical |
10 000 000 |
| electrical endurance (operating cycles) of auxiliary contacts |
|
| ● at DC-13 at 6 A at 24 V typical |
30 000 |
| ● at AC-15 at 6 A at 230 V typical |
200 000 |
| type of assignment |
continous operation according to IEC 60947-6-2 |
| reference code according to IEC 81346-2 |
Q |
| Substance Prohibitance (Date) |
05/01/2012 |
| SVHC substance name |
Lead - 7439-92-1
Lead monoxide (lead oxide) - 1317-36-8
2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol - 79-94-7
Lead titanium zirconium oxide - 12626-81-2
|
| Ambient conditions |
| installation altitude at height above sea level maximum |
2 000 m |
| ambient temperature |
|
| ● during operation |
-20 ... +60 °C |
| ● during storage |
-55 ... +80 °C |
| ● during transport |
-55 ... +80 °C |
| relative humidity during operation |
10 ... 90 % |
| Main circuit |
| number of poles for main current circuit |
3 |
| adjustable current response value current of the current-dependent overload release |
0.1 ... 0.4 A |
| formula for making capacity limit current |
120 x Ie |
| formula for limit current breaking capacity |
100 x Ie |
| yielded mechanical performance for 4-pole AC motor |
|
| ● at 400 V rated value |
0.09 kW |
| ● at 500 V rated value |
0.12 kW |
| ● at 690 V rated value |
0.18 kW |
| operating voltage at AC-3 rated value maximum |
690 V |
| operational current |
|
| ● at AC at 400 V rated value |
0.4 A |
| ● at AC-3 at 400 V rated value |
0.4 A |
| ● at AC-43 |
|
| — at 400 V rated value |
0.3 A |
| — at 500 V rated value |
0.32 A |
| — at 690 V rated value |
0.35 A |
| operating power |
|
| ● at AC-3 at 400 V rated value |
0.09 kW |
| ● at AC-43 |
|
| — at 400 V rated value |
90 W |
| — at 500 V rated value |
120 W |
| — at 690 V rated value |
180 W |
| no-load switching frequency |
3 600 1/h |
| operating frequency |
|
| ● at AC-41 according to IEC 60947-6-2 maximum |
750 1/h |
| ● at AC-43 according to IEC 60947-6-2 maximum |
250 1/h |
| Control circuit/ Control |
| type of voltage |
AC/DC |
| control supply voltage 1 at AC |
|
| ● at 50 Hz rated value |
240 V |
| ● at 50 Hz |
110 ... 240 V |
| ● at 60 Hz |
110 ... 240 V |
| control supply voltage frequency |
|
| ● 1 rated value |
50 Hz |
| ● 2 rated value |
60 Hz |
| control supply voltage 1 at DC |
|
| ● rated value |
240 V |
| ● |
110 ... 240 V |
| holding power |
|
| ● at AC maximum |
6 W |
| ● at DC maximum |
5.1 W |
| Auxiliary circuit |
| number of NC contacts for auxiliary contacts |
1 |
| number of NO contacts for auxiliary contacts |
1 |
| number of NO contacts of instantaneous short-circuit trip unit for signaling contact |
1 |
| number of CO contacts of the current-dependent overload release for signaling contact |
1 |
| operational current of auxiliary contacts at AC-12 maximum |
10 A |
| operational current of auxiliary contacts at DC-13 at 250 V |
0.27 A |
| Protective and monitoring functions |
| trip class |
CLASS 10 and 20 adjustable |
| operating short-circuit current breaking capacity (Ics) |
|
| ● at 400 V rated value |
53 kA |
| ● at 500 V rated value |
3 kA |
| ● at 690 V rated value |
3 kA |
| UL/CSA ratings |
| full-load current (FLA) for 3-phase AC motor |
|
| ● at 480 V rated value |
0.4 A |
| ● at 600 V rated value |
0.4 A |
| contact rating of auxiliary contacts according to UL |
contacts 21-22, 13-14, 43-44 Q600 / A600, contacts 77-78 R300 / B300, contacts 95-96-98 R300 / D300 |
| Short-circuit protection |
| product function short circuit protection |
Yes |
| design of short-circuit protection |
electromagnetic |
| design of the fuse link |
|
| ● for short-circuit protection of the auxiliary switch required |
fuse gL/gG: 10 A |
| ● for short-circuit protection of the signaling switch of the short-circuit release required |
6A gL/gG/400V |
| ● for short-circuit protection of the signaling switch of the overload release required |
4A gL/gG/400V |
| Installation/ mounting/ dimensions |
| mounting position |
any |
| mounting position recommended |
vertical, on horizontal standard DIN rail |
| fastening method |
screw and snap-on mounting |
| height |
191 mm |
| width |
45 mm |
| depth |
165 mm |
| Connections/ Terminals |
| product component removable terminal for main circuit |
Yes |
| product component removable terminal for auxiliary and control circuit |
Yes |
| type of electrical connection |
|
| ● for main current circuit |
plug-in without terminals |
spring-loaded terminals |
| ● for auxiliary and control circuit |
spring-loaded terminals |
| type of connectable conductor cross-sections for main contacts |
|
| ● solid |
2x (1.5 ... 6 mm²), 1x 10 mm² |
| ● finely stranded with core end processing |
2x (1.5 ... 6 mm²) |
| ● finely stranded without core end processing |
2x (1.5 ... 6 mm²) |
| type of connectable conductor cross-sections |
|
| ● for auxiliary contacts |
|
| — solid |
2x (0.25 ... 1.5 mm²) |
| — finely stranded with core end processing |
2x (0.25 ... 1.5 mm²) |
| — finely stranded without core end processing |
2x (0.25 ... 1.5 mm²) |
| ● for AWG cables for auxiliary contacts |
2x (24 ... 16) |
| Safety related data |
| proportion of dangerous failures |
|
| ● with low demand rate according to SN 31920 |
40 % |
| ● with high demand rate according to SN 31920 |
50 % |
| B10 value with high demand rate according to SN 31920 |
3 000 000 |
| failure rate [FIT] with low demand rate according to SN 31920 |
100 FIT |
| IEC 61508 |
| T1 value for proof test interval or service life according to IEC 61508 |
20 a |
| Electrical Safety |
| protection class IP on the front according to IEC 60529 |
IP20 |
| touch protection on the front according to IEC 60529 |
finger-safe |
| Communication/ Protocol |
| product function bus communication |
No |
| protocol is supported |
|
| ● AS-Interface protocol |
No |
| ● IO-Link protocol |
No |
| product function control circuit interface with IO link |
No |
| Electromagnetic compatibility |
| conducted interference |
|
| ● due to burst according to IEC 61000-4-4 |
4 kV main contacts, 2 kV auxiliary contacts |
| ● due to conductor-earth surge according to IEC 61000-4-5 |
4 kV main contacts, 2 kV auxiliary contacts |
| ● due to conductor-conductor surge according to IEC 61000-4-5 |
2 kV main contacts, 1 kV auxiliary contacts |
| ● due to high-frequency radiation according to IEC 61000-4-6 |
0.15-80Mhz at 10V |
| field-based interference according to IEC 61000-4-3 |
10 V/m |
| electrostatic discharge according to IEC 61000-4-2 |
8 kV |
| conducted HF interference emissions according to CISPR11 |
150 kHz ... 30 MHz Class A |
| field-bound HF interference emission according to CISPR11 |
30 ... 1000 MHz Class A |
| Supply voltage |
| Supply voltage required Auxiliary voltage |
No |
| Display |
| number of LEDs |
2 |
| Approvals Certificates |
| EU declaration of conformity |
|
Yes
|
Yes
|
| UK Declaration of Conformity
|
|
Yes
|
Yes
|
| CCC
|
|
Yes
|
Yes
|
| Confirmation |
|
Yes
|
Yes
|
| UL
|
|
Yes
|
Yes
|
| EAC
|
|
Yes
|
Yes
|
| RCM
|
|
Yes
|
Yes
|
| Type Examination Certificate
|
|
Yes
|
Yes
|
| Type Test Certificates/Test Report
|
|
Yes
|
Yes
|
| ABS (American Bureau of Shipping)
|
|
Yes
|
Yes
|
| DNV (Det Norske Veritas) |
|
Yes
|
Yes
|
| LR (Lloyds Register)
|
|
Yes
|
Yes
|
| PRS (Polski Register of Shipping) |
|
Yes
|
Yes
|
| Confirmation |
|
Yes
|
Yes
|
| Transport Information
|
|
Yes
|
Yes
|
| Environmental Confirmations
|
|
Yes
|
Yes
|
|
Information on the packaging
|
|
Information- and Downloadcenter (Catalogs, Brochures,…)
|
|
Industry Mall (Online ordering system)
|
|
Cax online generator
|
|
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
|
|
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
|
|
Characteristic: Tripping characteristics, I²t, Let-through current
|
|
Further characteristics (e.g. electrical endurance, switching frequency)
|
|
|
|
|
|
|
|
|
|