| Article number |
3RT1036-1BB40
|
3RT2036-1KB40
|
|
|
|
|
Power contactor, AC-3 50 A, 22 kW / 400 V 24 V DC, 3-pole, Size S2, screw terminal ! Phased-out product! Successor is SIRIUS 3RT2 Preferred successor type is >>3RT2036-1KB40<< |
power contactor, AC-3e/AC-3, 51 A, 22 kW / 400 V, 3-pole, 24 V DC, 0.8-1.2* Us, with integrated varistor, auxiliary contacts: 1 NO + 1 NC, screw terminal, size: S2, suitable for PLC outputs |
| product brand name |
SIRIUS |
| product designation |
power contactor |
Coupling contactor |
| product type designation |
|
3RT2 |
| General technical data |
| size of contactor |
S2 |
| product extension |
|
| ● function module for communication |
|
No |
| ● auxiliary switch |
|
Yes |
| power loss [W] for rated value of the current |
|
| ● at AC in hot operating state |
|
12 W |
| ● at AC in hot operating state per pole |
|
4 W |
| ● without load current share typical |
|
1 W |
| type of calculation of power loss depending on pole |
|
quadratic |
| insulation voltage |
|
| ● rated value |
690 V |
|
| ● of main circuit with degree of pollution 3 rated value |
|
690 V |
| ● of auxiliary circuit with degree of pollution 3 rated value |
|
690 V |
| degree of pollution |
3 |
|
| surge voltage resistance rated value |
6 kV |
|
| maximum permissible voltage for protective separation between coil and main contacts according to EN 60947-1 |
400 V |
| protection class IP |
|
| ● on the front |
IP20 |
| ● of the terminal |
IP00 |
| shock resistance at rectangular impulse |
|
| ● at DC |
10g / 5 ms, 5g / 10 ms |
7.7g / 5 ms, 4.5g / 10 ms |
| shock resistance with sine pulse |
|
| ● at DC |
15g / 5 ms, 8g / 10 ms |
12g / 5 ms, 7g / 10 ms |
| mechanical service life (operating cycles) |
|
| ● of contactor typical |
10 000 000 |
| ● of the contactor with added electronically optimized auxiliary switch block typical |
5 000 000 |
| ● of the contactor with added auxiliary switch block typical |
10 000 000 |
| reference code according to IEC 81346-2 |
Q |
| Substance Prohibitance (Date) |
05/01/2012 |
10/01/2014 |
| SVHC substance name |
|
Lead - 7439-92-1
Lead monoxide (lead oxide) - 1317-36-8
|
| Ambient conditions |
| installation altitude at height above sea level maximum |
2 000 m |
| ambient temperature |
|
| ● during operation |
-25 ... +60 °C |
| ● during storage |
-55 ... +80 °C |
| relative humidity minimum |
|
10 % |
| relative humidity at 55 °C according to IEC 60068-2-30 maximum |
|
95 % |
| Environmental footprint |
| Environmental Product Declaration(EPD) |
|
Yes |
| Global Warming Potential [CO2 eq] total |
|
107 kg |
| Global Warming Potential [CO2 eq] during manufacturing |
|
5.88 kg |
| Global Warming Potential [CO2 eq] during operation |
|
102 kg |
| Global Warming Potential [CO2 eq] after end of life |
|
-0.988 kg |
| Main circuit |
| number of poles for main current circuit |
3 |
| number of NO contacts for main contacts |
3 |
| number of NC contacts for main contacts |
0 |
|
| operating voltage |
|
| ● at AC-3 rated value maximum |
|
690 V |
| ● at AC-3e rated value maximum |
|
690 V |
| operational current |
|
| ● at AC-1 at 400 V at ambient temperature 40 °C rated value |
60 A |
70 A |
| ● at AC-1 |
|
| — up to 690 V at ambient temperature 40 °C rated value |
60 A |
70 A |
| — up to 690 V at ambient temperature 60 °C rated value |
55 A |
60 A |
| ● at AC-3 |
|
| — at 400 V rated value |
50 A |
51 A |
| — at 500 V rated value |
|
51 A |
| — at 690 V rated value |
24 A |
| ● at AC-3e |
|
| — at 400 V rated value |
|
51 A |
| — at 500 V rated value |
|
51 A |
| — at 690 V rated value |
|
24 A |
| ● at AC-4 at 400 V rated value |
41 A |
| connectable conductor cross-section in main circuit at AC-1 |
|
| ● at 60 °C minimum permissible |
16 mm² |
|
| ● at 40 °C minimum permissible |
16 mm² |
|
| operational current for approx. 200000 operating cycles at AC-4 |
|
| ● at 400 V rated value |
24 A |
| ● at 690 V rated value |
12.6 A |
20 A |
| operating power |
|
| ● at AC-1 |
|
| — at 230 V rated value |
|
26 kW |
| — at 230 V at 60 °C rated value |
22 kW |
|
| — at 400 V rated value |
38 kW |
46 kW |
| — at 400 V at 60 °C rated value |
|
39 kW |
| — at 690 V rated value |
66 kW |
79 kW |
| — at 690 V at 60 °C rated value |
66 kW |
68 kW |
| ● at AC-2 at 400 V rated value |
22 kW |
| ● at AC-3 |
|
| — at 230 V rated value |
15 kW |
| — at 400 V rated value |
22 kW |
| — at 500 V rated value |
30 kW |
| — at 690 V rated value |
22 kW |
| ● at AC-3e |
|
| — at 230 V rated value |
|
15 kW |
| — at 400 V rated value |
|
22 kW |
| — at 690 V rated value |
|
22 kW |
| operating power for approx. 200000 operating cycles at AC-4 |
|
| ● at 400 V rated value |
12.6 kW |
| ● at 690 V rated value |
11.4 kW |
18.2 kW |
| thermal short-time current limited to 10 s |
400 A |
|
| no-load switching frequency |
|
| ● at DC |
1 500 1/h |
| operating frequency |
|
| ● at AC-1 maximum |
1 000 1/h |
| ● at AC-2 maximum |
400 1/h |
600 1/h |
| ● at AC-3 maximum |
800 1/h |
| ● at AC-3e maximum |
|
800 1/h |
| ● at AC-4 maximum |
300 1/h |
250 1/h |
| Control circuit/ Control |
| type of voltage of the control supply voltage |
DC |
| control supply voltage at DC rated value |
|
| ● |
24 V |
| operating range factor control supply voltage rated value of magnet coil at DC |
|
| ● initial value |
0.8 |
| ● full-scale value |
1.1 |
1.2 |
| design of the surge suppressor |
|
with varistor |
| closing power of magnet coil at DC |
13.3 W |
21.5 W |
| holding power of magnet coil at DC |
13.3 W |
1 W |
| closing delay |
|
| ● at DC |
60 ... 100 ms |
35 ... 80 ms |
| opening delay |
|
| ● at DC |
20 ... 25 ms |
30 ... 55 ms |
| arcing time |
10 ... 15 ms |
10 ... 20 ms |
| control version of the switch operating mechanism |
|
Standard A1 - A2 |
| Auxiliary circuit |
| number of NC contacts for auxiliary contacts instantaneous contact |
0 |
1 |
| number of NO contacts for auxiliary contacts instantaneous contact |
0 |
1 |
| operational current at AC-12 maximum |
10 A |
| operational current at AC-15 |
|
| ● at 230 V rated value |
6 A |
10 A |
| ● at 400 V rated value |
3 A |
| ● at 500 V rated value |
|
2 A |
| ● at 690 V rated value |
|
1 A |
| operational current at DC-12 |
|
| ● at 24 V rated value |
|
10 A |
| ● at 48 V rated value |
|
6 A |
| ● at 60 V rated value |
6 A |
| ● at 110 V rated value |
3 A |
| ● at 125 V rated value |
|
2 A |
| ● at 220 V rated value |
1 A |
| ● at 600 V rated value |
|
0.15 A |
| operational current at DC-13 |
|
| ● at 24 V rated value |
10 A |
| ● at 48 V rated value |
|
2 A |
| ● at 60 V rated value |
2 A |
| ● at 110 V rated value |
1 A |
| ● at 125 V rated value |
|
0.9 A |
| ● at 220 V rated value |
0.3 A |
| ● at 600 V rated value |
|
0.1 A |
| contact reliability of auxiliary contacts |
1 faulty switching per 100 million (17 V, 1 mA) |
| UL/CSA ratings |
| full-load current (FLA) for 3-phase AC motor |
|
| ● at 480 V rated value |
|
52 A |
| ● at 600 V rated value |
|
52 A |
| yielded mechanical performance [hp] |
|
| ● for single-phase AC motor |
|
| — at 110/120 V rated value |
|
3 hp |
| — at 230 V rated value |
|
10 hp |
| ● for 3-phase AC motor |
|
| — at 200/208 V rated value |
|
15 hp |
| — at 220/230 V rated value |
|
15 hp |
| — at 460/480 V rated value |
|
40 hp |
| — at 575/600 V rated value |
|
50 hp |
| contact rating of auxiliary contacts according to UL |
A600 / Q600 |
A600 / P600 |
| Short-circuit protection |
| design of the fuse link |
|
| ● for short-circuit protection of the main circuit |
|
| — with type of coordination 1 required |
fuse gL/gG: 160 A |
gG: 160 A (690 V, 100 kA), aM: 80 A (690 V, 100 kA), BS88: 125 A (415 V, 80 kA) |
| — with type of assignment 2 required |
fuse gL/gG: 80 A |
gG: 80A (690V,100kA), aM: 50A (690V,100kA), BS88: 63A (415V,80kA) |
| ● for short-circuit protection of the auxiliary switch required |
fuse gL/gG: 10 A |
gG: 10 A (500 V, 1 kA) |
| Installation/ mounting/ dimensions |
| mounting position |
|
+/-180° rotation possible on vertical mounting surface; can be tilted forward and backward by +/- 22.5° on vertical mounting surface |
| fastening method |
screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 50022 |
screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| height |
112 mm |
114 mm |
| width |
55 mm |
| depth |
130 mm |
| required spacing |
|
| ● with side-by-side mounting |
|
| — forwards |
|
10 mm |
| — upwards |
|
10 mm |
| — downwards |
|
10 mm |
| — at the side |
|
0 mm |
| ● for grounded parts |
|
| — forwards |
|
10 mm |
| — upwards |
|
10 mm |
| — at the side |
6 mm |
| — downwards |
|
10 mm |
| ● for live parts |
|
| — forwards |
|
10 mm |
| — upwards |
|
10 mm |
| — downwards |
|
10 mm |
| — at the side |
|
6 mm |
| Connections/ Terminals |
| type of electrical connection |
|
| ● for main current circuit |
screw-type terminals |
| ● for auxiliary and control circuit |
screw-type terminals |
| ● at contactor for auxiliary contacts |
|
Screw-type terminals |
| ● of magnet coil |
|
Screw-type terminals |
| type of connectable conductor cross-sections for main contacts |
|
| ● solid |
2x (0.75 ... 16 mm²) |
|
| ● stranded |
2x (0.75 ... 25 mm²) |
|
| ● solid or stranded |
2x (0.75 ... 16 mm²) |
2x (1 ... 35 mm²), 1x (1 ... 50 mm²) |
| ● finely stranded with core end processing |
2x (0.75 ... 16 mm²) |
2x (1 ... 25 mm²), 1x (1 ... 35 mm²) |
| ● finely stranded without core end processing |
2x (0.75 ... 16 mm²) |
|
| connectable conductor cross-section for main contacts |
|
| ● solid or stranded |
|
1 ... 50 mm² |
| ● finely stranded with core end processing |
|
1 ... 35 mm² |
| connectable conductor cross-section for auxiliary contacts |
|
| ● solid or stranded |
|
0.5 ... 2.5 mm² |
| ● finely stranded with core end processing |
|
0.5 ... 2.5 mm² |
| type of connectable conductor cross-sections |
|
| ● for auxiliary contacts |
|
| — solid |
2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (0.75 ... 4 mm²) |
|
| — solid or stranded |
|
2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| — finely stranded with core end processing |
2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| ● for AWG cables for auxiliary contacts |
2x (20 ... 16), 2x (18 ... 14), 1x 12 |
2x (20 ... 16), 2x (18 ... 14) |
| AWG number as coded connectable conductor cross section |
|
| ● for main contacts |
|
18 ... 1 |
| ● for auxiliary contacts |
|
20 ... 14 |
| Safety related data |
| product function |
|
| ● mirror contact according to IEC 60947-4-1 |
|
Yes |
| ● positively driven operation according to IEC 60947-5-1 |
|
No |
| suitability for use |
|
| ● safety-related switching on |
|
No |
| ● safety-related switching OFF |
|
Yes; applies only to contactor operating mechanism |
| proportion of dangerous failures |
|
| ● with low demand rate according to SN 31920 |
|
40 % |
| ● with high demand rate according to SN 31920 |
|
73 % |
| B10 value with high demand rate according to SN 31920 |
|
1 000 000 |
| failure rate [FIT] with low demand rate according to SN 31920 |
|
100 FIT |
| IEC 61508 |
| T1 value |
|
| ● for proof test interval or service life according to IEC 61508 |
|
20 a |
| Electrical Safety |
| protection class IP on the front according to IEC 60529 |
|
IP20 |
| touch protection on the front according to IEC 60529 |
|
finger-safe, for vertical contact from the front |
| Approvals Certificates |
| CSA
|
|
Yes
|
Yes
|
| UK Declaration of Conformity
|
|
Yes
|
Yes
|
| EU declaration of conformity |
|
Yes
|
Yes
|
| CCC
|
|
Yes
|
Yes
|
| Confirmation |
|
Yes
|
Yes
|
| UL
|
|
Yes
|
Yes
|
| EAC
|
|
Yes
|
Yes
|
| RCM
|
|
Yes
|
Yes
|
| Special Test Certificate
|
|
Yes
|
Yes
|
| Miscellaneous
|
|
Yes
|
Yes
|
| Type Test Certificates/Test Report
|
|
Yes
|
Yes
|
| Miscellaneous
|
|
Yes
|
Yes
|
| ABS (American Bureau of Shipping)
|
|
Yes
|
Yes
|
| RINA (Registro Italiano Navale) |
|
Yes
|
Yes
|
| Miscellaneous
|
|
Yes
|
Yes
|
| Confirmation |
|
Yes
|
Yes
|
| Miscellaneous
|
|
Yes
|
Yes
|
| Special Test Certificate
|
|
Yes
|
Yes
|
| Environmental Confirmations
|
|
Yes
|
Yes
|
|
Information on the packaging
|
|
Information- and Downloadcenter (Catalogs, Brochures,…)
|
|
Industry Mall (Online ordering system)
|
|
Cax online generator
|
|
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
|
|
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
|
|
Characteristic: Tripping characteristics, I²t, Let-through current
|
|
Further characteristics (e.g. electrical endurance, switching frequency)
|
|
|
|
|
|
|
|
|
|