Article number

6EP1336-3BA00

6EP1336-3BA10

SITOP Modular/1AC/DC24V/20A

SITOP PSU8200/1ACDC/24VDC/20A

SITOP modular 20 A Stabilized power supply input: 120/230 V AC output: 24 V DC/20 A

SITOP PSU8200 20 A stabilized power supply input: 120-230 V AC 110-220 V DC output: 24 V DC/20 A

input

type of the power supply network

1-phase AC

1-phase and 2-phase AC or DC

supply voltage at AC

● minimum rated value

120 V

● maximum rated value

230 V

● initial value

85 V

● full-scale value

275 V

supply voltage at AC

Set by means of wire jumper on the device; starting from Vin > 93/183 V

temperature derating necessary at Uin<100 V AC or DC at 50 °C; additional derating at Uin<100 V: Uin=95 V Pa max=460 W, Uin=90 V Pa max=440 W, Uin=85 V Pa max=420 W

supply voltage

120 V/230 V

input voltage 1 at AC

85 ... 132 V

input voltage 2 at AC

176 ... 264 V

supply voltage at DC

110 ... 220 V

input voltage at DC

88 ... 350 V

wide range input

No

Yes

overvoltage overload capability

2.3 × Vin rated, 1.3 ms

buffering time for rated value of the output current in the event of power failure minimum

20 ms

operating condition of the mains buffering

at Vin = 230 V

line frequency

50/60 Hz

line frequency

47 ... 63 Hz

input current

● at rated input voltage 120 V

7.7 A

4.6 A

● at rated input voltage 230 V

3.5 A

2.5 A

current limitation of inrush current at 25 °C maximum

60 A

20 A

I2t value maximum

9.9 A²·s

5 A²·s

fuse protection type

Yes

fuse protection type in the feeder

Recommended miniature circuit breaker at 1-phase operation: 10 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230 V)

Recommended miniature circuit breaker at 1-phase operation: 10 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2711-1HD10 (UL 489) at 120 V or 3RV2711-1ED10 (UL 489) at 230 V

output

voltage curve at output

Controlled, isolated DC voltage

output voltage at DC rated value

24 V

output voltage

● at output 1 at DC rated value

24 V

output voltage adjustable

Yes; via potentiometer

adjustable output voltage

24 ... 28.8 V

24 ... 28 V

relative overall tolerance of the voltage

3 %

relative control precision of the output voltage

● on slow fluctuation of input voltage

0.1 %

● on slow fluctuation of ohm loading

0.1 %

0.3 %

residual ripple

● maximum

100 mV

● typical

30 mV

80 mV

voltage peak

● maximum

200 mV

● typical

60 mV

100 mV

display version for normal operation

Green LED for 24 V OK

type of signal at output

via signaling module (6EP1961-3BA10)

Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"

behavior of the output voltage when switching on

Overshoot of Vout approx. 3 %

No overshoot of Vout (soft start)

response delay maximum

0.1 s

1.5 s

voltage increase time of the output voltage

● typical

50 ms

250 ms

output current

● rated value

20 A

● rated range

0 ... 20 A; +60 ... +70 °C: Derating 3.5%/K

0 ... 20 A; +60 ... +70 °C: Derating 3%/K

supplied active power typical

480 W

short-term overload current

● at short-circuit during operation typical

60 A

duration of overloading capability for excess current

● at short-circuit during operation

25 ms

constant overload current

● on short-circuiting during the start-up typical

23 A

30 A

bridging of equipment

Yes; switchable characteristic

number of parallel-switched equipment resources for increasing the power

2

efficiency in percent

89 %

94 %

power loss [W]

● at rated output voltage for rated value of the output current typical

59 W

31 W

closed-loop control

relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical

1 %

0.5 %

relative control precision of the output voltage load step of resistive load 50/100/50 % typical

2 %

1 %

setting time

● load step 50 to 100% typical

2 ms

1 ms

● load step 100 to 50% typical

2 ms

1 ms

setting time

● maximum

5 ms

protection and monitoring

design of the overvoltage protection

< 35 V

< 31.8 V

property of the output short-circuit proof

Yes

design of short-circuit protection

Alternatively, constant current characteristic approx. 23 A or latching shutdown

Alternatively, constant current characteristic approx. 21.5 A or latching shutdown

● typical

23 A

21.5 A

overcurrent overload capability

● in normal operation

overload capability 150 % Iout rated up to 5 s/min

enduring short circuit current RMS value

● typical

23 A

21.5 A

display version for overload and short circuit

LED yellow for "overload", LED red for "latching shutdown"

safety

galvanic isolation between input and output

Yes

galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

SELV (ES1) output voltage Ua according to EN 61204-7, transformer according to EN 61558-2-16

operating resource protection class

Class I

leakage current

● maximum

3.5 mA

● typical

0.4 mA

1 mA

protection class IP

IP20

standard

● for emitted interference

EN 55022 Class B

● for mains harmonics limitation

EN 61000-3-2

● for interference immunity

EN 61000-6-2

standards, specifications, approvals

certificate of suitability

● CE marking

Yes

● UL approval

Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259

Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 62368-1, UL 62368-1)

● CSA approval

Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259

Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 62368-1, UL 62368-1)

● UKCA marking

Yes

● EAC approval

Yes

● Regulatory Compliance Mark (RCM)

Yes

● NEC Class 2

No

● SEMI F47

Yes

type of certification

● BIS

Yes; R-41183539

● CB-certificate

No

Yes

MTBF at 40 °C

786 164 h

583 500 h

standards, specifications, approvals hazardous environments

certificate of suitability

● IECEx

No

● ATEX

No

● ULhazloc approval

No

● cCSAus, Class 1, Division 2

No

● FM registration

No

standards, specifications, approvals marine classification

shipbuilding approval

Yes

Marine classification association

● American Bureau of Shipping Europe Ltd. (ABS)

Yes

● French marine classification society (BV)

No

● Det Norske Veritas (DNV)

Yes

● Lloyds Register of Shipping (LRS)

No

standards, specifications, approvals Environmental Product Declaration

Environmental Product Declaration

Yes

Global Warming Potential [CO2 eq]

● total

1 881.8 kg

989.5 kg

● during manufacturing

34.7 kg

18.9 kg

● during operation

1 846.1 kg

970 kg

● after end of life

0.5 kg

0.27 kg

ambient conditions

ambient temperature

● during operation

0 ... 70 °C; with natural convection

-25 ... +70 °C; With natural convection; startup tested starting from -40 °C nominal voltage

● during transport

-40 ... +85 °C

● during storage

-40 ... +85 °C

environmental category according to IEC 60721

Climate class 3K3, 5 … 95% no condensation

connection method

type of electrical connection

screw terminal

● at input

L, N, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded

● at output

+, -: 2 screw terminals each for 0.5 ... 4 mm²

+, -: 2 screw terminals each for 0.2 ... 4 mm²

● for auxiliary contacts

-

13, 14 (alarm signal), 15, 16 (Remote ON OFF): 1 screw terminal each for 0.14 ... 1.5 mm²

mechanical data

width × height × depth of the enclosure

160 × 125 × 125 mm

90 × 125 × 125 mm

installation width × mounting height

160 × 225 mm

90 × 225 mm

required spacing

● top

50 mm

● bottom

50 mm

● left

0 mm

● right

0 mm

fastening method

Snaps onto DIN rail EN 60715 35x7.5/15

● standard rail mounting

Yes

● S7 rail mounting

No

● wall mounting

No

housing can be lined up

Yes

net weight

2.2 kg

1.2 kg

accessories

electrical accessories

Buffer module, signaling module

Buffer module

mechanical accessories

Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20

further information internet links

internet link

● to web page: selection aid TIA Selection Tool

https://siemens.com/tst

● to website: Industrial communication

http://www.siemens.com/simatic-net

● to website: CAx-Download-Manager

http://www.siemens.com/cax

additional information

other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

security information

Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7)

Approvals Certificates