Article number

SITOP dual 2X 15 V/3,5 A

SITOP PSU3600 DUAL/1ACDC/2x15VDC/3.5A

********* spare part ********** SITOP power 15 V dual output stabilized power supply input: 120-230 V AC output: 2X 15 V DC/3.5 A

SITOP PSU3600 dual stabilized power supply Input: 120-230 V AC Output: 15 V/3,5 A 2x DC two potential-free outputs

input

type of the power supply network

1-phase AC

1-phase AC or DC

supply voltage at AC

● minimum rated value

120 V

● maximum rated value

230 V

● initial value

93 V

85 V

● full-scale value

264 V

supply voltage at AC

Derating at < 110 V AC/DC: output power max. 100 W

input voltage at DC

88 ... 250 V

wide range input

Yes

overvoltage overload capability

Surge voltage in accordance with EN 61000-6-2 Table 4

buffering time for rated value of the output current in the event of power failure minimum

10 ms

operating condition of the mains buffering

at Vin = 120 V, 40 ms at Vin = 187 V

line frequency

50/60 Hz

line frequency

47 ... 63 Hz

input current

● at rated input voltage 110 V

1.3 A

● at rated input voltage 120 V

1.9 A

2.2 A

● at rated input voltage 220 V

0.7 A

● at rated input voltage 230 V

1.15 A

1.3 A

current limitation of inrush current at 25 °C maximum

30 A

35 A

duration of inrush current limiting at 25 °C

● typical

3 ms

I2t value maximum

3 A²·s

1 A²·s

fuse protection type

T 4 A/250 V (not accessible)

T 3.15 A (not accessible)

fuse protection type in the feeder

Recommended miniature circuit breaker: from 10 A characteristic C or from 16 A characteristic B

Recommended miniature circuit breaker: 6-10 A characteristic C

output

voltage curve at output

Controlled, isolated DC voltage

number of outputs

2

output voltage at DC rated value

15 V

formula for output voltage

2 x 15 V DC

output voltage

● at output 1 at DC rated value

15 V

● at output 2 at DC rated value

15 V

output voltage adjustable

Yes; via potentiometer

Yes; via potentiometer per output

adjustable output voltage

14.5 ... 17 V

12 ... 28 V

relative overall tolerance of the voltage

2 %

1 %

relative control precision of the output voltage

● on slow fluctuation of input voltage

0.2 %

0.1 %

● on slow fluctuation of ohm loading

0.2 %

1 %

residual ripple

● maximum

50 mV

● typical

20 mV

voltage peak

● maximum

150 mV

display version for normal operation

Green LED grün for Vout >10 V (summation display)

type of signal at output

-

behavior of the output voltage when switching on

Overshoot of Vout < 3 %

Overshoot of Vout < 1 %

response delay maximum

1 s

0.5 s

output current

● rated value

3.5 A

● at output 1 rated value

3.5 A

● at output 2 rated value

3.5 A

● rated range

0 ... 3.5 A; +45 ... +60 °C: Derating 2%/K

0 ... 3.5 A; Output power max. 60 W per output

supplied active power typical

105 W

bridging of equipment

Yes

number of parallel-switched equipment resources for increasing the power

2

efficiency in percent

80 %

88 %

power loss [W]

● at rated output voltage for rated value of the output current typical

27 W

18 W

protection and monitoring

design of the overvoltage protection

Yes, according to EN 60950-1

≤ 35 V

property of the output short-circuit proof

Yes

design of short-circuit protection

Electronic shutdown, automatic restart

response value current limitation

4.9 A

5 A

design of the current limitation

Limit point < 4.9 A; switch-off point < 6 A

depending on the voltage setting

safety

galvanic isolation between input and output

Yes

galvanic isolation

Safety extra low output voltage Vout according to EN 60950-1

operating resource protection class

Class I

leakage current

● maximum

3.5 mA

protection class IP

IP20

standard

● for emitted interference

EN 55011 Class A

EN 55022 Class B

● for mains harmonics limitation

-

EN 61000-3-2

● for interference immunity

EN 61000-6-2

standards, specifications, approvals

certificate of suitability

● CE marking

Yes

● UL approval

Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E179336

Yes; cULus-listed (UL 508, CSA C22.2 No. 107.1), file E197259; outputs NEC Class 2 acc. to UL 1310

● CSA approval

No; -

Yes; -

● EAC approval

Yes

● Regulatory Compliance Mark (RCM)

Yes

● NEC Class 2

No

Yes; according to UL1310

type of certification

● CB-certificate

No

standards, specifications, approvals hazardous environments

certificate of suitability

● IECEx

No

● ATEX

No

● ULhazloc approval

No

● cCSAus, Class 1, Division 2

No

● FM registration

No

standards, specifications, approvals marine classification

shipbuilding approval

No

Marine classification association

● American Bureau of Shipping Europe Ltd. (ABS)

No

● French marine classification society (BV)

No

● Det Norske Veritas (DNV)

No

● Lloyds Register of Shipping (LRS)

No

ambient conditions

ambient temperature

● during operation

0 ... 60 °C; with natural convection

-25 ... +70 °C; Derating > 60°C: 2%/°K

● during transport

-40 ... +70 °C

● during storage

-40 ... +70 °C

environmental category according to IEC 60721

Climate class 3K3, 5 … 95% no condensation

connection method

type of electrical connection

screw terminal

● at input

L1, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded

● at output

P15_1, GND_1, GND_2: 1 screw terminal each for 0.5 ... 2.5 mm²; P15_2: 2 screw terminals for 0.5 ... 2.5 mm²

+: 1 screw terminal per output for 0.5 ... 2.5 mm²; -: 2 screw terminals per output for 0.5 ... 2.5 mm²

● for auxiliary contacts

-

mechanical data

width × height × depth of the enclosure

75 × 125 × 125 mm

42 × 125 × 125 mm

installation width × mounting height

75 × 325 mm

42 × 225 mm

required spacing

● top

100 mm

50 mm

● bottom

100 mm

50 mm

● left

0 mm

● right

0 mm

fastening method

Snaps onto DIN rail EN 60715 35x7.5/15

● standard rail mounting

Yes

● S7 rail mounting

No

● wall mounting

No

housing can be lined up

Yes

net weight

0.75 kg

0.55 kg

further information internet links

internet link

● to web page: selection aid TIA Selection Tool

https://siemens.com/tst

● to website: Industrial communication

http://www.siemens.com/simatic-net

● to website: CAx-Download-Manager

http://www.siemens.com/cax

additional information

other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

security information

Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7)

Approvals Certificates