ENG_394517.XML
Flexible connection of the cabling system consists of a S7-1500 front connector which has the 20 or 40 single cores already in place and which directly connects the I/O modules (35 mm design) with the sensors and actuators inside the control cabinet. With a cross-section of 0.5 square mm, the single wires are also suitable for higher currents and are available in different lengths and versions: as H05V-K cores (PVC insulation), H05Z-K (halogen-free insulation) or with UL/CSA certified cores. The halogen-free version has a low smoke gas density in the event of a fire and is thus particularly well suited for use in buildings.
ENG_394520.XML
Up to 16 or 32 digital input and output channels can be connected directly to the I/O (35 mm design) with a front connector with single wires. The single wires are fitted with screw-type contacts in the front connector and are cut off straight at the other end. The cores have a cross section of 0.5 mm2 and can be easily assigned since they are coded in accordance with the pin designations on the front connector. Cable ties combine the single cores into a bundle.
The front connectors with single cores are available in the following lengths: 2.5 m, 3.2 m, 5.0 m, 6.5 m, 8.0 m and 10.0 m. Special lengths available on request.
The single cores are available in different versions:
- Core type H05V-K is used for industrial applications.
- The UL/CSA-approved core is available for exports to North America.
- The halogen-free version is used where low smoke gas density in the event of fire is required, e.g. in building automation
G_KT01_XX_00865
SIMATIC TOP connect for S7-1500/ ET200 MP, flexible connection
