Product overview

FMT020 flow transmitter

High performance, robust and intelligent product, designed to fit perfectly for a wide area of process applications that require accurate, and reliable flow measurement of conductive fluids.

• High accuracy up to 0.2% of rate
• 3 totalizers for forward, reverse, and net flow
  
• Backwards compatible with older (up to 15 years) flow meter sensors (MAG 5100W)
• Fast start-up without zero-point adjustments
• Variety of functions for comprehensive device check, self-diagnosis, and onboard verification
• Verificator compatible - Independently verifies performance of sensor, transmitter, and installation (including cable) without process interruption
• Easy to use HMI display with local four-button programming, menu-driven parameters, and Wizard support for key applications
• Multi-functional outputs for process control, minimum configuration with analog, digital (pulse, frequency, status), and relay output
• SD memory card for data logging, configuration backup, and firmware update
• Seamless field device integration in host systems
• Communication modules: HART, Modbus RTU, PROFINET, EtherNet/IP, PROFIBUS

MAG 5000/6000 flow transmitter

Versatile, microprocessor-based transmitter with multiple function outputs and a modular housing concept for more flexible installation options is the ideal product for a wide range of applications.

Available in a robust polyamide housing or as a 19” rack-mount version, the product is designed to offer high performance, simple operation and reduced maintenance.

• High performance: Cost-effective transmitter with high accuracy
• Rugged design: Suitable for universal applications with a durable construction
• Function outputs: Includes 0/4 ... 20mA, digital, and relay outputs for process control
• SensorProm Technology: Stores sensor characteristic data for easy commissioning
• Plug & Play: Allows simple on-site replacement and commissioning in minutes
• Hot swappable: Exchangeable during operation without downtime
• Mounting Flexibility: Supports both compact (integral mount) and remote design
• Comprehensive self-diagnostic, for error indication and logging
• Service and diagnostics: Designed for on-site verification with traceable certification
• Communication module: HART, MODBUS, PROFIBUS, FOUNDATION Fieldbus, DeviceNet
• Custody transfer approvals: MI-001, PTB K7.2

MAG 6000 I flow transmitter

Designed in robust die-cast aluminum housing for demanding applications and where explosion proof protection is necessary.

• Remote and compact mounting with all sensors
• Communication modules: HART, Modbus, PROFIBUS, FOUNDATION Fieldbus, DeviceNet
• Ex Approval: ATEX, IECEx, FM, CSA
• Multi-lingual display and touchpad keypad
• Comprehensive self-diagnostic

MAG 1100 /  1100 HT flow sensor

Compact and cost-effective device suitable for measuring ultra low flows, for flow measurement in chemical applications and for use in industries with extreme process conditions.

The obstructionless performance of the MAG 1100 is unaffected by the suspended solids, viscosity and temperature challenges.

• Wafer type sensor (flangeless), diameter DN 2 …1 00, 1/12"…4"
• Corrosion-resistant AISI 316 stainless steel housing
• Highly resistant liner (ceramic or PFA) and electrodes fitting most extreme process media
• Temperature rating up to 200 °C (390 °F)
• Approvals for use in hazardous areas

MAG 1100 F flow sensor

Specially designed for the food & beverage and pharmaceutical industry.

• AISI 316 stainless steel enclosure
• Hygienic seal, 3A
• Easy to clean
• Supplied with connections according to your specification
• Ex approval: ATEX, FM

FMS300, MAG 3100 / 3100 HT flow sensor

Device with a large variety of pipe diameters and wetted materials to meet the demands of almost every flow application. A fully welded construction, liner and electrode materials capable of withstanding the most extreme process conditions provide a ruggedness that allows measurement of even the most extreme process media.

• Wide range of pipe dimensions: DN 15 ... 2200 (½" ... 88")
• High-temperature version for application with temperatures up to
  180 °C (355 °F)
• Fully welded construction provides a ruggedness that suits the toughest applications and environments
  
• Wide range of electrode and liner materials to fit even the most extreme process media
• Easy commissioning, the SENSORPROM memory unit automatically updates the settings.
• Approvals for use in hazardous areas

MAG 3100 P flow sensor

Tailored product to meet the specific requirements of the chemical and process industries. Moreover, this versatile sensor finds its primary applications also in the pulp and paper sector as well as in the industrial wastewater management.

• Pipe dimensions DN 15 ... 300 (½" ... 12")
• Standardized warehousing ensures short delivery times
• Approvals for use in hazardous areas
• Fully welded design withstands special process conditions
• Temperature resistant up to 150 °C (302 °F)

MAG 5100 W flow sensor

Ideal product for applications in water abstraction, wastewater treatment, water distribution networks, custody transfer metering and irrigation.

• Pipe dimensions DN 15 ... 2000 (½" ... 80")
• Zero Up and Zero Down installation capabilities
• EPDM liner specifically for drinking water applications
• NBR rubber liner for all water and wastewater applications
• Integrated grounding electrodes – no grounding rings
• Increased low flow accuracy for water leak detection
• Drinking water and custody transfer approvals
• Rugged construction with no moving parts for maintenance-free operation over many years
• Simple on-site upgrade to IP68 of a standard sensor allowing underground installation, permanent immersion or underwater installation

FM100 flow meter

Electromagnetic flowmeter for measuring and monitoring small and medium flows.

• Connection ½", ¾", 1", 2"
• Flow- and temperature measurement
• IO-Link communication
• Dosing function with external control output
• Flexible usage in different applications due to two individual configurable outputs
• Bidirectional measurement
• Robust stainless-steel design

TRANSMAG 2 transmitter

Designed for heavy-duty applications like pulp & paper stock over 3%; heavy mining slurries and mining slurries with magnetic particles.

• Magnetic flowmeter with a very strong pulsed AC magnetic field
• PROFIBUS PA or HART communication
• Comprehensive self-test function

MAG 911/E flow sensor

Designed for heavy-duty applications like pulp & paper stock over 3%; heavy mining slurries and mining slurries with magnetic particles.

• Metering tube: DN 15 ... 1000 (½" ... 40")
• Metering tube liner: Hard Rubber, Linatex, Soft rubber, PTFE and Novolak
• Integral smartPLUG for storing of calibration values
• Multi-lingual display and touchpad keypad
• Only remote version

MAG 8000 water meter

Battery-operated electromagnetic water meter for water applications within abstraction, distribution network and revenue metering.

• Battery- and/or mains power operated water meter
• Metering tube DN 25 ... 1200 (1 ... 48")
• Remote and compact installation IP68/NEMA 6P enclosure
• Custody transfer approval: PTB K7.2, OIML R 49 and MI-001
• Drinking water approvals
• Communication modules: GSM/GPRS, Modbus, Encoder

FC330 flowmeters (dual tube design)

Designed for a variety of liquid and gas applications in the Process Industry.

Measurement of mass flow, density, temperature and fraction.

• DN 15, DN 25, DN 50, DN 80, DN 100 and DN 150
• Flow from 70 ... 860 000 kg/h - water
• Pipe material: AISI 316L or Nickel-Alloy C4
• Accuracy, typically: Flow: ≤ 0.1 % or 0.2 % version, Density: down to ≤ 0.002 g/cm³
• Liquid temperature/pressure: -50 ... +205 °C (-58 ... +400 °F)/up to 100 bar (1450 psi)
• Approvals: ATEX, IECEx, cCSAus, CRN, PED (depending on configuration)

FC310 flowmeters (dual tube design)

Designed for a variety of liquid and gas applications

Measurement of mass flow, density, temperature

Modbus RS 485 RTU communication for direct integration into skids, OEM and pre-assembled plant packages

• DN 15, DN 25, DN 50, DN 80, DN 100 and DN 150
• Flow from 70 ... 860 000 kg/h
• Pipe material: AISI 316L or Nickel-Alloy C4
• Accuracy, typically: Flow: ≤ 0.1 % or 0.2 % version, Density: down to ≤ 0.002 g/cm³
• Liquid temperature/pressure: -50 ... +205 °C (-58 ... +400 °F)/up to 100 bar (1450 psi)
• Approvals: ATEX, IECEx, cCSAus, Germanischer Lloyd/det Norske Veritas, Bureau Veritas, Lloyds of London, American Bureau of Shipping (depending on configuration)

FC430 flowmeters (dual tube design)

Designed for a variety of liquid and gas applications

Measurement of mass flow, density, temperature and fraction

• DN 15, DN 25, DN 50
• Flow from 20 ... 70 700 kg/h - water
• Pipe material: AISI 316L
• Accuracy, typically: Flow: ≤ 0.1 %, Density: down to 0.005 g/cm³
• Liquid temperature/pressure: -50 ... +200 °C (-58 ... + 392 °F)/up to 100 bar (1450 psi)
• Approvals: ATEX, IECEx, EAC Ex, cCSAus, NEPSI, CRN, PED, Germanischer Lloyd/det Norske Veritas, Bureau Veritas, Lloyds of London, American Bureau of Shipping

FC410 flowmeters (dual tube design)

Designed for a variety of liquid and gas applications

Measurement of mass flow, density, temperature

Modbus RS 485 RTU communication for direct integration into skids, OEM and pre-assembled plant packages

• DN 15, DN 25, DN 50
• Flow from 20 ... 70 700 kg/h
• Pipe material: AISI 316L
• Accuracy, typically: Flow: ± 0.1 %, Density: down to 0.005 g/cm³
• Liquid temperature/pressure: -50 ... +200 °C (-58 ... +392 °F)/up to 100 bar
• Approvals: ATEX, IECEx, EAC Ex, cCSAus, NEPSI, Germanischer Lloyd/det Norske Veritas, Bureau Veritas, Lloyds of London, American Bureau of Shipping

MASS 2100 and FC300 flowmeter with transmitter FCT010 or FCT030 (single tube design)

Designed for low flow applications

• MASS 2100: DI 1.5, DI 3, DI 6, DI 15
• FC300: DN 4
• Flow from 0.1 ... 5600 kg/h
• Pipe material: Stainless steel AISI 316L/ 1.4435; Hastelloy C22/2.4602
• Accuracy, typically:
  • Flow: down to 0.1 %
  • Density: down to 0.0005 g/cm³
• Liquid temp./pressure: -50 ... +180 °C (-58 ... +356 °F); up to 410 bar (5946 psi)
• Approvals: ed according to ATEX, IECEx, c-UL-us, CRN, PED

SITRANS FCT070 transmitter

SITRANS FCT070 can be connected to all Coriolis type Sensors FCS300, FCS400, MASS 2100 and FC300 DN.

FCT070 can be used for machine builders and in the process industry plants. The meters are suitable for measuring on liquid and gas. With ET 200SP ST & HF the SITRANS FCT070 can be installed decentralized in small stations, with fast communication to the control room.

The faceplates for TIA-Portal and PCS 7 offer the direct full remote access to the flowmeter.

• Easy integration into automation process control as TIA Portal and PCS 7
• Cost effective integration of Coriolis flowmeters for PLC controlled machines
• SITRANS FCT070 is a ET 200SP technology module and can combined with all other SIMATIC ET 200S SP ST & HF modules
• Fast and trouble-free communication between the flowmeter and the PLC through digital data communication with up to 10 ms update rate
• ATEX Zone 2 FM Class 1 Div 2 approvals
• Included advanced batch functionality without additional modules

FC120/FC140 flowmeter system

The flowmeter systems of the SITRANS FC100 series are the precision Coriolis multi-parameter flowmeter for low flow applications.

• Batching function with batch leakage detection and batch control by transmitter for precise dosing
• Accurate density measurement and up to four advanced concentration measurement data sets
• Sizes to suit pilot plants, R&D labs and high value fluid additives
• Wide choice of process connections, starting with DN 6 (¼ inch) for reduced installation efforts

FC520/FC540 flowmeter system

The flowmeter systems of the SITRANS FC500 series are the universal Coriolis multi-parameter flowmeter for routine and hygienic applications.

• Energy-efficient low pressure loss design with short tube paths and large tube diameter
• Batching function with batch leakage detection and batch control by transmitter for precise dosing
• Accurate density measurement and up to four advanced Concentration Measurement data sets
• Benefit from viscosity function and capability to handle high viscous process fluids
• Hygienic design, self-draining in vertical installation, with hygienic approval options

FC620/FC640 flowmeter system

The flowmeter systems of the SITRANS FC600 series are the resistant Coriolis multi-parameter flowmeter for extreme conditions.

• Temperatures from -196 °C (-321 °F), for cryogenic fluids, up to +350 °C (+662 °F)
• Insulation and heat tracing options for viscous and molten liquids
• Dynamic pressure compensation for accurate measurement under changing process pressure
• Accurate density measurement and up to four advanced concentration measurement data sets

FC720/FC740 flowmeter system

The flowmeter systems of the SITRANS FC500 series are the grande Coriolis multi-parameter flowmeter for large pipes and high flows.

• Energy-efficient low pressure loss design with short tube paths and large tube diameter
• Optimal decoupling of the dual tube measuring element from external stress and vibration
• Accurate density measurement and up to four advanced concentration measurement data sets
• Benefit from viscosity function and capability to handle high viscous process fluids
• High power tube driver to detect gas content to maintain dependable measurements with entrained gas

FCT020 transmitter

FCT020 is the standard transmitter, suitable for general purpose applications. It delivers accurate and precise measurements of mass flow rate, density, temperature and volume flow rate.

• Tube health check
• Communicaion modules: HART, Modbus

FCT040 transmitter

FCT040 is the advanced transmitter, offering a wider range of application solutions with improved performance.

• Tube health check
• Standard concentration measurement
• Petroleum measurement function
• Fraction (advanced concentration)
• Viscosity function
• Batching function
• Communicaion modules: HART, Modbus, PROFIBUS, PROFINET

FCS100 sensor

SITRANS FCS100 sensor is the precision Coriolis flow sensor for low flow applications.

• Install in tight spaces with no inlet and outlet restrictions
• Sizes to suit pilot plants, R&D labs, and high value fluid additives
• Combination with a remote transmitter via a connecting cable
• Installation of sensor and transmitter in different locations
  

FCS500 sensor

SITRANS FCS500 sensor is the universal Coriolis flow sensor for routine and hygienic applications.

• Dual curved AISI 316L stainless steel tubes with polished option
• Hygienic approvals for food, beverage, and pharmaceutical sectors
• Versatile solution with superior turndown and low pressure loss
• Combination with compact or remote transmitters

FCS600 sensor

SITRANS FCS600 sensor is the resistant Coriolis flow sensor for extreme conditions and corrosive fluids.

• Dual curved AISI 316L or alloy 22 tubes with optimum decoupling from external influences
• Temperatures from -196 °C (for cryogenic fluids), up to +350 °C
• Insulation and heat tracing options for viscous and molten liquids
• Combination with compact or remote transmitters

FCS700 sensor

SITRANS FCS700 sensor is the grande Coriolis flow sensor for large pipes and high flows.

• Dual curved AISI 316L stainless steel or alloy 22 tubes with optimum decoupling from external influences
• Energy efficient low pressure loss design with short tube paths and large tube diameter
• High power tube driver for dependable measurements in high damping applications
• Combination with compact or remote transmitters

SITRANS FST030 transmitter

SITRANS FST030 Inline is designed for all ultrasonic flowmetering.

The SITRANS FST030 can measure liquids or oil with the SONOKIT.

• For SONOKIT up to DN 3000 and more
• 1 or 2 path option
• Single, dual or four path version
• Hazardous area approvals for ATEX Zone 1,2, IECEx Zone 1,2 FMc Class I Div. 1,2

SITRANS FUS060 transmitter

SITRANS FUS060 is a time-based transmitter designed for ultrasonic flowmetering in pipes for the F US inline industry series up to DN 500

• Die-cast aluminum enclosure
• HART communication + 1 analog output, 1 digital output for frequency or pulse and 1 relay output for alarms and flow direction
• PROFIBUS PA communication with 1 digital output for frequency or pulse

SITRANS FUS080/FUE080 transmitter

SITRANS FUS080 is a time-based transmitter designed for ultrasonic flowmetering in pipes for the SONOKIT, FUS380 and FUE380 series up to DN 1200

• Battery or mains-powered
• Easy one-button operation
• Bidirectional measuring
• IrDA optical eye communication
• Robust polyamide enclosure

SONO 3300/FUS060

The main application for SONO 3300 ultrasonic flowmeters is to measure the volume flow of:

• Water and treated waste water
• Hot water/cooling systems

• DN 50 … 300 (2" … 12") steel pipes
• PN 10 ... 40 or class 150 ... 300 pressure rates
• Flow 0.3 … 3 200 m³/h (1.3 ... 14 089 GPM)
• No pressure drop
• FUS060 transmitter for separate mounting
• Signal cables from sensor to transducer are highly protected from aggressive environment by stainless steel pipes

SONO 3100/FUS060

The main application for SONO 3100 ultrasonic flowmeters is to measure the volume flow of:

• Water and treated waste water
• District heating systems

• DN 100 ... DN 500 (4" ... 19")
• Pipe in carbon steel
• Transducers can be replaced under pressure
• FUS060 transmitter for separate mount­ing
• Measure of all liquids less than 350 Cst, conductive or non-conductive
• No pressure drop
• 1-track, 2-path

SONOKIT

Installation of one, two or four transducer sets in existing concrete or steel pipes. Typically installed in pipes with large diameters or in hot/cold water applications

• SITRANS FST030 transmitter for sep­arate mounting
• DN 100 ... 3000 (4" ... 120")
• Control and display unit
• Temperature of medium: -20 ... +200 °C (-4 ... +395 °F)
• Installation on empty pipes or pipes under pressure (hot-tap installation)
• Standard 1-, 2- or 4-path

FUS380/FUE380

Battery or mains-powered ultrasonic flowmeter for use within water-based district heating, cooling systems and utility.

The FUS380 can also be used for water irrigation systems.

SITRANS FUS380/FUE380 are designed to work with the SITRANS FUE950 energy calculator.

• FUS380/FUE380: DN 50 ... 1200 (2" ... 48")
• FUE380: Approved for custody transfer according to MID MI004 (according to EN 1434 Class 2, OIML R 75)
• FUS380/FUE380: Red brass or painted carbon steel flanges and metering tube. AISI transducers
• Water temperatures 2 ... 200 °C (35.6 ... 392 °F)
• Battery or mains-powered

SITRANS FUE950

Universal thermal energy calculator for district heating and cooling applications.

• Battery or mains-powered
• 24 periods memory
• 2 ports for plug-in modules as data output, extra input, M-Bus, RS 232/RS 485, current output
• Complete set with temperature sensors and pockets
• MID heating approval, PTB K7.2 cooling approval, MI004 type approval

SITRANS FS230

SITRANS FS clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. These dedicated flowmeters are suitable for a wide variety of liquid applications, including those in the:

• Water Industry
• Wastewater Industry
• HVAC Industry
• Power Industry
• Processing Industry
• Hydrocarbon Industry

• Suitable for virtually any liquid, even those with high aeration or suspended solids
• Hydrocarbon functions are ideal for applications carrying crude oil, refined petroleum or gas
• Choice of single, dual or four path versions to suit your operating conditions and requirements
• Easy installation; no need to cut pipe or stop flow
• Minimal maintenance; external sensors do not require periodic cleaning
• Easy to read display with intuitive menu system
• Hazardous area approvals for ATEX Zone 1,2, IECEx Zone 1,2 FMc Class I Div. 1,2

SITRANS FS220

SITRANS FS220 basic is a fast-to-install clamp-on ultrasonic flowmeter for accurate measurements with minimal maintenance. Based on latest technology, this flowmeter is ideal suitable for applications like:

• Water Industry
• Wastewater Industry
• HVAC Industry
• Power Industry
• Process controls

• Easy installation during process condition, no need to cut pipe or stop flow
• Minimal maintenance; external sensors do not require periodic cleaning
• No media-contacting parts, no wear, no pressure drop, no energy loss
• Wide turn-down ratio, very sensitive in low flow condition
• Optional WideBeam technology ensures high performance
• Compatible with all previously fielded transit time sensors

SITRANS FS290

The portable clamp-on ultrasonic flow measurement system SITRANS FS290 is formed by the SITRANS FST090 portable clamp-on flowmeter with FSS200 sensors.

This system represents the next generation of digital flow measurement which allows you to easily measure or check flows in pipes.

• Easy installation: just clamp it on, with no need to cut pipe or stop flow
• Minimal maintenance: sensors do not require upkeep or cleaning
• No moving parts to foul or wear
• No pressure drop or energy loss
• Wide turn-down ratio
• Precise single path measuring

SITRANS FST070

The technology module SITRANS FST070 is an ultrasonic clamp-on flowmeter transmitter for the SIMATIC ET200SP.

The SITRANS FST070 can be used for machine builders, in the chemical industry or water treatments and is suitable for measuring on liquid, hydrocarbon and gas

• Easy integration into automation process control as TIA Portal and PCS 7 (SIMATIC)
• Easy selection and integration of flowmeters via TIA selector
• Precast face plates for TIA Portal and PCS 7
• No additional transmitter between automation and clamp-on sensors required
• Cost effective integration of clamp-on flowmeters for water treatments, control rooms with PCS 7
• SITRANS FST070 ET 200SP technology module can combined with all other SIMATIC ET200 modules
• Fast and trouble-free communication between the flowmeter and the PLC through digital data communication with up to 10 ms update rate
• ATEX Zone 2 Class 1 Div. 2. With the barrier SITRANS I300 the flowmeters sensor can be used in Ex Zone 1/0 Class 1 Div. 1 approval

SITRANS FX330

Very versatile and flexible for use in many process applications. Flow sensors combines flow, pressure and temperature measurement into one user-friendly, two-wire device.

• Measurement of saturated steam and superheated steam
• Heat metering of steam and hot water
• Measurement of consumption in compressed air systems
• Evaluation of Free Air Delivery (FAD)
• SIP and CIP processes in the food, beverage and pharmaceutical industries
• Measurement of conductive and non-conductive liquids
• Safety-related measurement in SIL applications (SIL2).

• Integrated pressure and temperature compensation
• Temperature compensation for saturated steam included as standard
• SIL2 certified according to IEC 61508 Edition 2
• Use in hazardous areas
• Integrated reduction of nominal diameter for space-saving and economic installation
• Exchange of electronics without loss of calibration and configuration data
• Gross and net heat calculation to support energy management
• Remote version with cable length up to 50 m (164 ft)

FVA250

Measurement of flow of liquids and gases, also highly suitable for corrosive media, high temperatures and high pressures.

• All-metal variable area meter with various float materials
• Connections: DN 15 ... 100 (½" ... 4")
• Temperature of medium: -20 °C ... +300 °C (-4 ... +572 °F)
• Optionally available with analog output or contacts

SITRANS FP product line is suitable for all kinds of applications – liquids, dry or humid gases and steam. Due to the robust though variable design it has been and still is one of the main technologies for flow measurement in various industries.

A new digital sizing process ensures minimum effort during presales and full traceability in aftersales. The differential pressure portfolio consists of

• pitot tubes SITRANS FPS300
• primary elements according to ISO 5167 (orifices) SITRANS FPS200

• Suitable for a vast range of different applications
• Available as pre-mounted compact system as well as remote parts
• Advanced intelligent sizing procedure
• Web-based sizing and data storage enables full traceability and easy communication
• All benefits of SITRANS P320 available