SiePortal is not yet available in the selected region
Please mind, SiePortal is not yet available in the region you selected. If you continue, you will be taken to the platform SiePortal, which will successively be replaced by SiePortal also in that region.
In the selected region, SiePortal is available
Please mind, in the region you selected, our SiePortal is already replaced by its successor, SiePortal. If you continue, you will be taken to SiePortal, which will successively replace SiePortal also in other regions.
Use our online form for specific solution suggestions or send your technical question directly to a product specialist in the Technical Support.
Create request
Status of your requests
Track the status of your request online. An overview of your request can be found here:
Status of your requests
Status of your requests
Search in
Product Catalogue
Product Catalogue
eClass 5.1
eClass 6
eClass 9
eClass 9.1
Minimize
Drive technology
Automation technology
Energy
Low-Voltage controls and distribution
Market-specific solutions
Automotive industry
Biofuels and bioenergy
Chemical and petrochemical industries
Food, drinks and tobacco industry
Machine and Plant Construction
Packaging machines
Printing presses
Textile machines
Converting
Tire production machines
Metal forming technology
Glass production machines
Handling systems
Solar production machines
Cranes
Plastics
General Motion Control
Machine Tools
SINUMERIK 808
SINUMERIK 828
SINUMERIK 840
Introduction SINUMERIK 840D sl with SINAMICS S120
Function overview of SINUMERIK 840D sl with SINAMICS S120
Glossary SINUMERIK 840D sl
Control structure and configuration
Drives
Axis functions
Spindle functions
Interpolations
Couplings
Transformations
Measuring
Technologies
Motion-synchronous actions
CNC programming language
Programming support
Simulations
Operating modes
Tools
Communication and data management
Operation
Monitoring functions
Compensations
Programmable logic controller PLC
Safety functions
Engineering
Auto Servo Tuning AST
Call Auto Servo Tuning from part program AST call
Automated commissioning Create MyConfig
Commissioning series machines
Commissioning drives and backing up drive data
Configuring, commissioning, optimization and service
CNC program messages
Alarms and messages
Action log
SIMATIC ProDiag S7-1500 for WinCC
PLC status
Access MyMachine /P2P
Use HMI applications Run MyScreens
Use HMI applications Run MyHMI /3GL
Program screens, operating areas and user interfaces Create MyHMI
Program screens, operating areas and user interfaces Create MyHMI /3GL
Program screens and user interfaces Run MyHMI /WinCC Frame IPC
Program screens and user interfaces, Run MyHMI /WinCC Frame universal
Program screens, operating areas and user interfaces Run MyHMI /WinCC
User interface on SIMATIC Panel Run MyHMI /SIMATIC OP for SIMATIC Comfort and Mobile Panels
Use standardized and freely configurable operating screens, Run MyHMI /PRO
Execute compile cycles Run MyCC
Develop compile cycles Create MyCC
Develop compile cycles on a user-specific interface Create MyCCI
Compile cycles interface Run MyCCI /xy
COA interface for compiled OEM cycles Run MyCCI /COOC
All messages and alarms are displayed on the operator panel in plain text with date and time as well as the appropriate symbol for the delete criterion. Alarms and messages are displayed separately. All alarms are saved in an alarm log that can be configured according to size.
Alarms and messages in the part program: Messages can be programmed to give the user information on the current processing status while the program is executing. The contents of variables can also be displayed in message texts. Alarms may also be used in the part program. An alarm always goes hand in hand with a response from the CNC according to the alarm category. A large number of alarm numbers are available to the user for alarms and messages from the part program. Please refer to the programming instructions for the alarm numbers that can be used for this purpose.
Alarms and messages from the PLC: Machine-specific alarms and messages can be displayed directly from the PLC program in plain text. Messages comprise status messages and error messages. In the case of status messages, the display is immediately deleted when the condition is no longer active, error messages must be acknowledged. User-specific alarm numbers of the PLC can be assigned to general, channel-specific, axis-specific and spindle-specific user alarms and messages. Please refer to the PLC documentation for the alarm numbers that can be used. The response of the CNC to alarms or messages can be configured. The configured alarm and message texts are saved in application-specific text files.
Specific evaluation of alarms: A channel-specific signal can be used to decide whether other channels may continue to be used when an alarm is issued.
Benefits
The operator receives information regarding the current machining situation during execution of the program