ENG_495530.XML
Customized inscriptions
The labels can be inscribed with text and symbols not listed in the ordering data.
The EMERGENCY STOP backing plates/labels can be divided into as many as four radial segments. Each segment can be custom-labeled.
The default typeface used for inscriptions with text is Arial and the text is centered.
EMERGENCY STOP backing plate/label 75 mm:
The font height is 5 mm.
Two or four radial segments are permitted.
EMERGENCY STOP backing plate 60 mm:
The font height is 4 mm.
Two or four radial segments are permitted.
EMERGENCY STOP backing plate 45 mm:
The font height is 4 mm.
Two radial segments are permitted.
Ordering notes
Add one of the following order codes to the article number:
-
Q0Y: Segment(s) in upper/lower case, always upper case for beginning of segment, e.g. Z1=Not halt Z2=Emergency stop
-
Q1Y: Segment(s) in upper case, e.g. Z1=NOT HALT Z2=EMERGENCY STOP
-
Q2Y: Segment(s) in lower case, e.g. Z1=not halt Z2=emergency stop
-
Q5Y: Segment(s) in upper/lower case, all words begin with upper case letters, e.g. Z1=Not Halt Z2=Emergency Stop
-
Q3Y: Symbol with number according to ISO 7000 or IEC 60417
-
Q9Y: Inscription of choice, text or symbol, can only be ordered via SIRIUS ACT configurator with a Configuration Identification Number (CIN)
When ordering, specify the required inscription without umlauts (ä, ö, ü) and without spaces after Z=, Z1 =, etc. in addition to the article number and order code (see ordering examples 1 to 4).
Symbols can also be ordered with numbers according to ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
The SIRIUS ACT configurator must be used to select special inscriptions and symbols (see ordering example 5). In this case, a CIN (Configuration Identification Number) is generated for placement of future orders. It is then possible to place an order directly using the CIN and the SIRIUS ACT configurator (shopping cart in SiePortal) or via the standard ordering channels.
Standard ordering channels:
With ordering options Q0Y, Q1Y, Q2Y, Q3Y and Q5Y a 1-line inscription of two or four radial segments can be implemented. The text or symbol must be assigned to the respective radial segments as follows:
Ordering example 1, two radial segments
An EMERGENCY STOP backing plate,
75 mm diameter, with two radial segments is required
G_IC03_XX_07395
3SU1900‑0BB31‑0AZ0
Q1Y
Z1=NOT
Z2=HALT
Ordering example 2, four radial segments
An EMERGENCY STOP backing plate,
75 mm diameter, with four radial segments is required
P_IC01_XX_00769
3SU1900‑0BB31‑0AZ0
Q1Y
Z1=E‑STOP
Z2=EMERGENCIA
Z3=NOT‑HALT
Z4=EMERGENZA
Ordering example 3
An EMERGENCY STOP backing plate,
75 mm diameter, with symbol No. 5011 according to IEC 60417 is required:
3SU1900‑0BB31‑0AZ0
Q3Y
Z=5011 IEC
Ordering example 4
An EMERGENCY STOP backing plate,
75 mm diameter, with symbol No. 1118 according to ISO 7000 is required:
3SU1900‑0BB31‑0AZ0
Q3Y
Z=1118 ISO
Ordering example 5
An EMERGENCY STOP backing plate,
75 mm diameter, with customized inscription is required:
3SU1900‑0BB31‑0AZ0
Q9Y
CIN....................
(20-digit number generated from the SIRIUS ACT configurator)