SITOP PSU6200

High performance – Focused diagnostics – The all-round power supply for a wide variety of applications

The SITOP PSU6200 product family is the new standard power supply for customers with high technical requirements regarding reliability, efficiency and integration. It is suitable for many fields of application, particularly in the industrial environment, such as series machine building. The SITOP PSU6200 represents the state-of-the-art and takes the SITOP product portfolio into new dimensions of efficiency.

The slim and excellent design of the PSU6200 family combined with the push-in terminals means easy installation and wiring. The power supply units in this product family are all-rounders featuring a long service life and absolute reliability.

The high efficiency of up to 96% guarantees resource-saving energy consumption.

To further increase the 24 V availability, the SITOP PSU6200 power supplies can be combined with buffer, DC UPS, redundancy and selectivity modules.

Product highlights of the product line

• Diagnostics monitor¹⁾
  • LED display for DC OK, utilization (<30%, >30%, >60%, >90%) and remaining life time
• Diagnostics interface¹⁾
  • Provision of important operating parameters (e.g. output current/voltage, overload, temperature status, undervoltage and overvoltage detection at output, operating hours, device settings, etc.)
• Switchable output characteristic¹⁾
  • Constant current: Power supply not switched off immediately in the event of overload
  • Parallel operation: Uniform load sharing between power supply units connected in parallel for longer service life in every scenario
• Rugged input
  • Active PFC (Power Factor Correction)¹⁾ for lower reactive and inrush current and protection against mains pulses
  • Optimized protection of the input circuit
  • Wide-range input
  • DC capability of 1-phase devices
  • Continuous duty possible on 2 phases of 3-phase devices
• Coordinated product family
  • For 12 V, 24 V and 48 V applications of varying power requirements
  • 24 V versions for NEC Class 2 and Ex protection applications
• Narrow overall width
  • For direct side-by-side mounting without lateral clearance requirements
  • Visually attractive design (IF Design Award 2019)
• Push-in connection system
  • Easy, time-saving installation without need for tools
  • Additional minus terminal¹⁾ (grounding) for wiring according to PELV (Protected Extra Low Voltage)
• High overload capability²⁾
  • Power reserves in case of overload 150% extra power for 5 s/min
  • Continuous 120% rated current up to 45 °C ambient temperature

¹⁾ from 24 V/10 A and 12 V/12 A

²⁾ from 24 V/5 A and 12 V/7 A