ENG_394456.XML
With two cabling systems, SIMATIC TOP connect ensures efficient wiring of the input and output module of the SIMATIC S7-1500 (35 mm unit): Fully modular connection for fast and clearly arranged connecting to sensors and actuators in the field, and flexible connection for simple wiring inside the control cabinet.
With the TIA Selection Tool, you can select suitable system cabling for the individual I/O modules with a simple mouse click. Suitable components for the respective I/O module are always offered. These can be transferred to the order list and then ordered in the Industry Mall.
More information is available on the internet at
http://www.siemens.com/tia-selection-tool
ENG_394504.XML
Two cabling variants are available for a wide range of control cabinet concepts:
Fully modular connection
The system consists of:
- Front connector module
- Connecting cable
- Connection modules in the following versions: Basic module, signal module and function module
Connection errors are thus practically excluded and installation overhead is significantly reduced. Systematic connection of the SIMATIC system. The assembly work for the connecting cables is drastically reduced thanks to the use of pre-assembled cables sold by the meter.
G_KT01_XX_00866
SIMATIC TOP connect for S7-1500/ET 200MP, fully modular connection
Flexible connection
Flexible connection with front connectors is available with 20 (Pin1 – 20) or 40 wired single cores.
These are available in lengths from 2.5 m to 10.0 m.
The single cores are available in different versions:
- Wire type H05V-K is used for industrial applications
- The UL/CSA-approved core is available for export to North America
- The halogen-free version is used where low smoke gas density in the event of fire is required, e.g. in building automation
The blue wires are numbered sequentially and can be routed direct to each element in the control cabinet. The numbering of the single cores corresponds to the coding of the front connector contacts.
In comparison to conventional single wiring, there is a cost saving of 50% for assembly, since the single cores that have already been checked on the connector are fixed.
Thus no complex pre-assembly of up to two times 20 single cores per module is necessary.
G_KT01_XX_00865
SIMATIC TOP connect for S7-1500/ET 200MP, flexible connection
